Schaff Piano Product Catalog - page 87

87
BRIDGE PINS AND REPAIR ITEMS
For...Bridges...Pin Planks...Sounding Boards
LUNSFORD’S INSTANT PIN-TITE
Tightens in MINUTES, restores pin
block permanently, preserves and
protects wood, remains dry, tune within
hour - 20 minutes in many cases, and
also tightens instantly many action
parts, cases, benches, and stripped
screw holes. 8 oz Bottle.
No. 1347 -
Each
SOUND BOARD BUTTONS
Made of maple. 1” diameter.
No. 354 -
Each
No. F108 -
Flat Head 10 x 1 Screws. Per 100
GARFIELD PIN BLOCK RESTORER
This success of GARFIELD PIN BLOCK
RESTORER has brought about many
imitations. There is only one original
and genuine GARFIELD Restorer -
made by a formula developed by Wm.
M. Garfield after 40 years experience
as a tuner and technician. For your
own protection, insist upon it.
GARFIELD’S PIN BLOCK RESTORER
has these important features: It comes
in liquid form...easy to apply with a
syringe or eye dropper. It penetrates
into the cells of the wood to restore its
holding power. It contains no oil...will
not evaporate. Its effectiveness
improves with age...in one week the
pins are tight enough to permit tuning.
It prevents rust...will not affect glue. 4
oz bottle. Must be diluted with
an equal amount of Denatured
Alcohol.
No. 1346 -
Each
SPRUCE SHIMS
For filling cracks in piano sound board.
Fine quality spruce. 30” long.
No. 943 -
3/16" approximate width at top. Each
No. 943A -
1/8" approximate width at top. Each
BRIDGE PINS
Coppered, with one end pointed, other
end round, 1” long
No. 551-6
(Dia .076)
Per 100
No. 551-7
(Dia .086)
Per 100
No. 551-8
(Dia .096)
Per 100
No. 551-9
(Dia .109)
Per 100
No. 551-10
(Dia .135)
Per 100
Coppered with round ends, 3/4” long
No. 543-6
(Dia .076)
Per 100
No. 543-7
(Dia .086)
Per 100
No. 543-8
(Dia .096)
Per 100
No. 543-9
(Dia .109)
Per 100
Nickel Plated, with one end pointed,
other end round, 1” long
No. 55IN-6
(Dia .076)
Per 100
No. 55IN-7
(Dia .086)
Per 100
No. 55IN-8
(Dia .096)
Per 100
No. 55IN-9
(Dia .109)
Per 100
No. 55IN-10
(Dia .135)
Per 100
SOUNDBOARD SHIMMING TOOL
The wedge shaped cutting tool is made of high grade tool
steel that is chrome plated. With a 4-1/2” wood handle and
an overall length of 8-1/2”, this shimming tool is used for
opening cracks in the soundboard to prepare for gluing
wooden shims.
No. 102 -
Soundboard Shimming Tool. Each
SHIMMING CHISEL
This tool opens up a perfect “V” joint of proper depth, trims
the wooden shim after it is glued and scrapes it smooth.
Made from high quality tool steel that is lacquered. Blade is
1” wide and overall tool length is 9-1/2”.
No. 187 -
Shimming Chisel. Each
0...,77,78,79,80,81,82,83,84,85,86 88,89,90,91,92,93,94,95,96,97,...186
Powered by FlippingBook