Schaff Piano Product Catalog - page 56

HEAD AND TAIL PIECES WITH SCREW CLAMP
Both the head piece, No. 249B, and the tail piece,
No. 249C, are made of solid brass. No. 250 Screw
Clamp is 3” long and is nickel plated.
No. 249 -
Screw Clamp
with Head Plate. Each
No. 249A -
Screw Clamp
with Tail Plate. Each
No. 249B -
Head Plate
Only. Each
No. 249C -
Tail Plate
Only. Each
No. 250 -
Screw Clamp
Only. Each
KEY REPAIRING TOOLS
56
KEY SPRING CLAMPS
These 6” long, spring loaded, nickel plated clamps with
rubber handles are sold in pairs with a 1” x 6” wooden
block. Any type of key material can be used with these
clamps. For ivory head and tail replacement use in
conjunction with our No. 249B Head Plate and No. 249C
Tail Plate.
No. 247 -
Key Spring Clamps. Per Pair
KEY FRONT SPRING CLAMP
6” long, nickel plated clamp has one arm folded so that it
can be inserted in the front bushing hole. Each clamp has a
1” square brass piece included for clamping key fronts.
No. 248 -
Key Front Spring Clamp. Each
SPRING CLAMP
This inexpensive spring clamp affords a means of clamping
many keys at one time without having to remove them from
the piano. For best results use with our No. 249B Head Plate.
Clamp is 2-3/4” l x 3/4” w, nickel plated.
No. 251 -
Spring Clamp. Each
TRIANGULAR SCRAPER
A general purpose scraper that has a triple edged blade with
hollow ground cutting edges that are hardened and tempered
for long lasting wear. Can be used for trimming and
deburring metals, tubing and plastics such as keytops.
Overall length 6-1/2”
No. 64 -
Triangular Scraper. Each
FILE AND TOOL HANDLE
4-1/4” long adjustable handle holds files, reamers, hacksaw
blades and other tang handled tools. Large, knurled adjusting
knob ensures positive locking.
No. 4042 -
File and Tool Handle. Each
KEY COVERING FILES
The files shown have four different cuts to accommodate
every piano key recovery requirement. These two flat files,
which are used for rapid removal of material, are double cut
on both sides with a single cut on the edges.
No. 252 -
Flat Bastard, Course Cut, 10” long. Each
No. 253 -
Flat Smooth, Fine Cut, 10” long. Each
These two mill files, which are used for final finishing, are
single cut on both sides and the edges.
No. 256 -
Mill Bastard, Medium Cut, 10” long. Each
No. 257 -
Mill Smooth, Fine Cut, 10” long. Each
KNIFE FILE
This file is 7-7/8” long and has tapered, second cut sides
for fine key work.
No. 254 -
Knife File. Each
0...,46,47,48,49,50,51,52,53,54,55 57,58,59,60,61,62,63,64,65,66,...186
Powered by FlippingBook