Schaff Piano Product Catalog - page 45

JACK HOLDING TOOL
A handy tool to be inserted between the jack and the let-off
button. Spring pressure keeps the jack away for easy removal
of butt flange screws. Made from black oxide spring steel,
3-1/4” long.
No. 129 -
Jack Holding Tool. Each
45
SCREWDRIVER ATTACHMENTS
A unique and compact approach to having extra large
screwdriver blades readily available. One end fits any
tuning lever tip, and the other accepts the four large
screwdriver tips. Included are 5/16” and 1/2” slotted
blades and a No. 2 and No. 4 phillips blade. The 2” long
chuck holder is nickel plated, the screwdriver blades are
black oxide.
No. 68 -
Screwdriver Attachments. Each
LARGE SLOTTED SCREWDRIVER
A slotted screwdriver with a squared end to fit into any
tuning lever tip. 3/8” wide blade is useful for tightening plate
screws. 4-1/4” long, made of tool steel.
No. 878 -
Large Blade Screwdriver. Each
LARGE PHILLIPS SCREWDRIVER
A No. 4 phillips screwdriver with a squared end to fit into
any tuning lever tip. Good for tightening plate screws. 4-
1/4” long, made of tool steel.
No. 879 -
Large Phillips Screwdriver. Each
TECHNICIAN’S TOOLS
KEY BUSHING WEDGE CLAMP
Made from zinc plated spring steel, this new style clamp
allows for faster and more professional looking rebushing
jobs. Can be used on both the center and front key bushing.
Clamp is 1-3/4” high.
No. 151 -
Key Bushing Wedge Clamp. Each
CLAMP
Whenever a hammer shank
is broken, this clamp is to
be used with either No.
130A or No. 130AS
Extractor. Clamp is 1-1/2”
long and nickel plated.
No. 130B -
Clamp. Each
GRAND SHANK PRESS
Measuring 3-1/2” in overall length,
this tool removes grand piano
hammer heads by pressing the
shank through the hammer heads.
The base is a polished brass
casting, the screw is nickel plated.
No. 131 -
Grand Shank Press. Each
HAMMER HEAD AND BUTT EXTRACTOR
Both extractors are used to remove either the hammer head or
butt from the hammer shank. The screw type mechanism exerts
even pressure to prevent damage. The beveled plate with
adjusting nut is used on hammer heads set at an angle. The
regular upright extractor can be used on all shanks measuring
greater than 3-1/4” long, whereas the spinet extractor can
accommodate a shank distance only 2-3/4” long. Both tools are
nickel plated.
No. 130A -
Upright Extractor. Each
No. 130AS -
Spinet Extractor. Each
VISE GRIP SHANK CLAMP
Another Schaff multi-purpose tool that was developed with
the help of a fellow piano technician. This is a great tool for a
compact tool case. Used as a hammer shank clamp, the vise
grip action saves time as compared to the hand screw type.
Overall length 5-1/2”, nickel plated.
No. 130VG -
Vise Grip Shank Clamp. Each
0...,35,36,37,38,39,40,41,42,43,44 46,47,48,49,50,51,52,53,54,55,...186
Powered by FlippingBook