Schaff Piano Product Catalog - page 44

SOUNDBOARD SHIMMING TOOL
The wedge shaped cutting tool is made of high grade tool
steel that is chrome plated. With a 4-1/2” wood handle and
an overall length of 8-1/2”, this shimming tool is used for
opening cracks in the soundboard to prepare for gluing
wooden shims.
No. 102 -
Soundboard Shimming Tool. Each
TECHNICIAN'S TOOLS
44
SANDPAPER FILE
Measuring 9” long x 1-1/8” wide, this tool is primarily
designed to file hammer heads. New sandpaper strips are
easily attached and will not slip.
No. 218 -
Sandpaper File. Each
No. 219 -
Replacement Sandpaper Strips. 11” long. Per Doz.
CURVED NOSE SCISSORS
These scissors are perfect for cutting
felt and cloth. 6” long, nickel plated.
No. 164 -
Curved Nose Scissors. Each
CURVED NOSE FORCEPS
These forceps have 1-1/4” long curved
and serrated jaws that can be locked into
place. Tool is 6” long, chrome plated.
No. 162 -
Curved Nose Forceps. Each
ALLIGATOR FORCEPS
For insertion of paper punchings when
leveling grand keys with the action in
place. Simply slit the punchings half
way through. The firm grip provided by
this tool enables the technician to press
the punching into place. Stainless steel.
No. 3212 -
Alligator Forceps. Each
SHIMMING CHISEL
This tool opens up a perfect “V” joint of proper depth, trims
the wooden shim after it is glued and scrapes it smooth.
Made from high quality tool steel that is lacquered. Blade is
1” wide and overall tool length is 9-1/2”.
No. 187 -
Shimming Chisel. Each
WOOD CHISEL
This is an excellent on-the-spot technician’s tool that can be
used with a combination handle. Chisel is 4” long with a
1/2” wide cutting blade. Black oxide finish.
No. 39 -
Wood Chisel. Each
PUNCHING LIFTER
Used to take punchings on and off key pins. Lifter is 6”
long and is nickel plated.
No. 158 -
Punching Lifter. Each
CORK INSERTER
An all aluminum tool used with a combination handle to
insert cork bridle straps into the hammer butt catcher hole.
4” long.
No. 141 -
Cork Inserter. Each
SPRING CLIP INSERTER
Another ingenious tool only available from Schaff. A molded
plastic saddle, at the end of the wood shank, accepts the brass
spring clip for easy insertion of the bridle strap on to the
hammer butt. 5-3/4” long.
No. 140 -
Spring Clip Inserter. Each
TWEEZERS
Invaluable to the technician for placing or removing
punchings, bridle straps and center pins. Chrome plated.
No. 160A -
Tweezers, 6” long. Each
No. 160C -
Tweezers, 8” long. Each
No. 160D -
Tweezers, 12” long. Each
CURVED END TWEEZERS
Fine, 6” tweezers with curved end. Stainless steel.
No. 3210 -
Curved End Tweezers. Each
0...,34,35,36,37,38,39,40,41,42,43 45,46,47,48,49,50,51,52,53,54,...186
Powered by FlippingBook